Answers are grounded in this paper and cite their sources.
This paper presents the characterization of six-port modulator for various hardware impairments with scheme for their digital correction. Six-port modulator is low-cost and wideband, which is easily scalable to mm-wave frequencies due to its simplified architecture. However, similar to quadrature modulator, six-port modulator also has few impairments resulting into distortion in terms of output spectrum with adjacent channel leakage, I/Q imperfections, and carrier leakage. These hardware imperfections and impairments are characterized, and the digital predistortion is then applied at baseband data to mitigate the distortion appearing at the output of six-port modulator. A neural network model is employed as inverse model in digital predistorter due to its inherent structure capable of modeling cross-interference, nonlinearity, and dc bias. The proposed characterization and distortion mitigation system is tested for modulating 64- and 256-quadrature amplitude modulation (QAM) data with the speed of 100 and 400 Mbps, respectively. These are modulated to radio frequency carrier at 2 GHz. Without a digital correction, the adjacent channel leakage ratio and error vector magnitude (EVM) does not qualify the industry standard. After the digital correction, the EVM of value as high as 20.14% in case of 256-QAM is reduced to 2.15%, which comply with the industry requirements.
No takes yet. Share an insight, caveat, or question.
Pathak et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: