Answers are grounded in this paper and cite their sources.
This work reports on modeling IB (intermediate band) solar cells based on ZnTe:O semiconductor and determination of their photovoltaic parameters using SCAPS (solar cell capacitance simulator) software. A comparative study between photovoltaic performance of ZnTe and ZnTe:O based solar cells has been carried out. It has been found that the energy conversion efficiency , short-circuit current density J sc , EQE (external quantum efficiency) and FF (fill factor) increased with increasing oxygen doping concentration N t up to the shallow acceptor density N A and decreased when N t was higher than N A . The open circuit-voltage V oc remained constant for N t lower than the acceptor doping concentration N A and decreased for N t higher than N A . The increase of , J sc and FF is due to the fact that IB is fully empted, so sub-bandgap photons can be absorbed by hole photoemission process from the VB (valence band) to the IB. The decrease of , J sc , EQE and FF is attributed to overcompensation for the base doping N A making electron photoemission process from IB to the CB (conduction band) maximized. This indicates that there is a competition between oxygen doping and intrinsic acceptor defects. The optimal concentrations of oxygen and shallow acceptor carriers were found to be N t 10 15 cm -3 and N A 10 14 cm -3 . The corresponding photovoltaic parameters were = 41.5%, J sc = 31.2 mA/cm 2 , V oc = 1.80 V and FF = 75.1%. Finally, the EQE spectra showed a blue shift of absorption edge indicating that the absorption process is extended to the sub-bandgap photons through IB.
No takes yet. Share an insight, caveat, or question.
Skhouni et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: