Answers are grounded in this paper and cite their sources.
Experimental study reveals a nickel interlayer improves film adhesion and preserves photocatalytic dye removal on copper, suggesting an effective barrier against metal oxidation.
The deposition of titanium dioxide (TiO 2 ) on copper (Cu) substrate was performed by electrophoresis in an aqueous medium. The samples obtained were then calcined at temperatures ranging from 300°C to 550°C with a pitch of 50°C. After calcinations at 500°C and 550°C, the TiO 2 film blackened and detached from the substrate. The XRD analyzes confirmed the formation of copper oxide at 350°C. The photocatalytic test carried out with amido black 10B (AB) under ultraviolet (UV) radiations showed that the percentage of discoloration decreases by increasing the calcination temperature. Moreover, the results obtained by the scratch test demonstrated that the samples exhibited poor adhesion. In order to improve the film adhesion and to avoid the formation of copper oxide, we introduced a nickel (Ni) layer. Afterward, the TiO 2 /Ni/Cu sample was calcined at 550°C, which allowed eliminating the forms of copper oxide, on the one hand, and improving the adhesion of the film, on the other hand. The rate of AB discoloration with TiO 2 /Ni/Cu sample was 25.54%, which is close to that of TiO 2 /Cu calcined at 450°C.
No takes yet. Share an insight, caveat, or question.
Laamari et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: