Answers are grounded in this paper and cite their sources.
An effective and economical fabrication process for the synthesis of nanopore-type "black silicon", that significantly decreases reflectivity of silicon wafer surfaces, is reported using a room temperature one-step Ag-assisted chemical etching method. The effects on the surface morphology and the corresponding surface reflectivity of the concentration of the silver catalyst (500, 50, and 5 μM), the HF and H2O2 concentration in the silicon etchant, the HF : H2O2 ratio, and etching time have been investigated. Lower reflectivity is a balance between sufficient silver catalyst to create large numbers of nanopores on a silicon surface and excessive silver that brings deeply etched channels that would potentially short-circuit a solar cell junction. The lowest relative effective reflectivity (0.17% over a range of 300-1000 nm) occurs with a silver ion concentration of 50 μM, however, with the silver ion concentration decreases to 5 μM surfaces with a low relative effective reflectivity (2.60%) and a short nanopore length (<250 nm) can be obtained with 10 minute etching time, indicating that this method can be used as a simple (one-pot), low cost (low silver concentration), energy efficient (room temperature), method for the synthesis of anti-reflection layers for silicon-based solar cell applications.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: