Answers are grounded in this paper and cite their sources.
Jieun Lee, DMD, MSD/Donald Belles, DDS, MS/Maria Gonzalez, DDS, MS/Sudarat Kiat-amnuay, DDS, MS/Alba Dugarte, DDS, MSD/Joe Ontiveros, DDS, MS: Purpose: To evaluate and compare the impact strength of 3D-printed resin to conventionally fabricated denture bases of heat-cure and cold-cure acrylic resin. Materials and Methods: Denture base materials were evenly divided into three groups (n = 25 each; N = 75): (1) 3D-printed material (Denture Base LP, Formlabs Dental); (2) Heat-cure acrylic resin (Lucitone 199, Dentsply Sirona); and (3) cold-cure acrylic resin (Lucitone HIPA, Dentsply Sirona). The 3D-printed specimens were designed with the dimensions 64 × 12.7 × 3.2 mm using computer-aided design software, then printed with a desktop stereo-lithography printer (Form 2, Formlabs). Heat-cure and cold-cure acrylic resin specimens were fabricated through conventional (compression and pouring) methods. The impact energy was read directly from the impact tester in joules, and the cross-sectional area of each specimen was used to calculate the impact strength in kJ/m2. Analysis of variance, Tukey multiple comparisons test, and a likelihood ratio α = .05 were conducted. Results: The average mean impact strength was 8.9 kJ/m2 for heat-cure acrylic resin, 11.2 kJ/m2 for 3D-printed resin, and 14.9 kJ/m2 for cold-cure acrylic resin. Tukey multiple comparisons test showed that the impact strength for the cold-cure group was significantly greater than for the 3D-printed resin and heat-cure acrylic resin groups. Conclusion: Within the limitations of this study, the cold-cure acrylic resin showed the greatest impact strength, followed by the 3D-printed resin and conventional heat-cure denture base materials, respectively.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: