Answers are grounded in this paper and cite their sources.
This paper presents the design and implementation of a Fiber To The Building (FTTB) network infrastructure based on Gigabit Passive Optical Network (GPON) technology in a hotel cluster building located in West Sumatra, Indonesia. GPON technology was selected for its cost-effectiveness and efficiency in the distribution area, particularly when the terminal bandwidth is set at ≤500 Mbps. The waterfall method was utilized in the network's design. The results were tested and analyzed across three Open System Interconnection (OSI) layers: the physical layer, represented by the link power budget; the datalink layer, represented by the Traffic Container (T-CONT); and the network layer, represented by the QoS network performance. The link power budget showed a minimum received power of -16.41 dBm on the downlink and -18.95 dBm on the uplink, with a power margin value above zero. T-CONT has been implemented with the fixed bandwidth value set to provide a bandwidth guarantee meeting the minimum requirement of 1.1 Mbps. The network performance of the FTTB GPON demonstrated excellent performance, as per Internet Protocol Harmonization Over Network (TIPHON) standards, recording a latency of 1.18 ms, jitter of 0.18 ms, and zero packet loss
No takes yet. Share an insight, caveat, or question.
Oktavianus et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: