Answers are grounded in this paper and cite their sources.
Inorganic membranes prepared by the sol-gel method are promising candidates for use as filters in separation processes. Conducting supported membranes and coatings have been produced from redispersable nanoscaled crystalline Sb-doped SnO 2 powders with Sb contents up to 10 mol%. The crystalline particles (ca. 4 nm) are fully redispersable in aqueous solution at pH≥8 with a solid content up to 37 vol.% and are monosized. After thermal treatment at different temperatures and times, the pore size diameter of such a powder can be adjusted from 4-20 nm with a very narrow pore size distribution (ca. ±1 nm) and a total porosity of 63%, practically independent of the sintering parameters. Uniaxial compacted substrates (unsupported membranes) present similar characteristics but with a larger pore size distribution (±5 nm) and 80% total porosity. Their electrical resistance decreases with sintering temperature and time to 4 Ω (800 °C, 8 h). Crack free transparent conducting coatings on glasses and ceramics have been obtained by spin-coating using fully dispersed aqueous solutions of the powder with volume content up to 7.8%. After thermal treatment (1 h at 550 °C) single layers 200 nm thick are still porous and exhibit specific electrical resistivity as low as ρ=2.5×10 –2 Ω cm with 90% transmission in the visible range.
No takes yet. Share an insight, caveat, or question.
Goebbert et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: