Answers are grounded in this paper and cite their sources.
The authors report on the formation and evaluation of V-based Ohmic contacts to n-AlGaN films in the entire alloy composition. The films were produced by plasma assisted molecular beam epitaxy and doped n-type with Si. The conductivity of the films was determined to vary from 103to10−2(Ωcm)−1 as the AlN mole fraction increases from 0% to 100%. Ohmic contacts were formed by e-beam evaporation of V(15nm)∕Al(80nm)∕V(20nm)∕Au(100nm). These contacts were rapid thermal annealed in N2 for 30s at various temperatures. The optimum annealing temperature for this contact scheme to n-GaN is about 650°C and increases monotonically to about 1000°C for 95%–100% AlN mole fraction. The specific contact resistivity was found to be about 10−6Ωcm2 for all films up to 70% AlN mole fraction and then increases to 0.1–1Ωcm2 for films from 95%–100% AlN mole fraction. These results were accounted for by hypothesizing that vanadium, upon annealing, interacts with the nitride film and forms vanadium nitride, which is consistent with reports that it is a metal with low work function.
No takes yet. Share an insight, caveat, or question.
France et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: