Answers are grounded in this paper and cite their sources.
Al5083 aluminum alloy is known for its strength and corrosion resistance, but it has poor wear properties. In this study, Al5083 was enhanced by adding FeCoCrCuTi high-entropy alloy (HEA) particles through multi-pass friction stir processing (FSP). The goal was to assess how 1, 3, and 5 FSP passes affect tensile strength, wear resistance, surface roughness, and microstructure. The samples underwent tensile testing, pin-on-disc wear testing, SEM/EDS analysis, and surface characterization. Results showed that increasing FSP passes led to significant improvements. The 5-pass sample exhibited superior tribological and mechanical properties, including the highest ultimate tensile strength (339 MPa), yield strength (310 MPa), and a low wear rate of 0.002675 mg/m compared to 0.01356 mg/m of the base metal. Grain refinement and even distribution of HEA particles contributed to better wear and strength. The study confirms that multi-pass FSP effectively enhances the Al5083-HEA composite’s strength and wear resistance, making it ideal for high-performance marine applications like hulls and shipbuilding, where durability against wear and corrosion is essential. The refined microstructure and even particle spread also suit industrial parts exposed to harsh conditions, such as gears, pumps, and machinery in offshore oil, gas exploration, and mining. Future research could focus on process optimization and post-processing to further boost performance and customize the material for specific uses.
No takes yet. Share an insight, caveat, or question.
Suresh et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: