This is the authors' abstract. We don't add key points for this paper.
Self‐reinforced poly(propylene) (PP) composites were produced by film‐stacking using carded mats of α‐isotactic PP fibers and films of β‐isotactic PP. Composite sheets were produced at various consolidation temperatures (T = 150–170°C) and constant holding time (t = 2 min). In a test series the holding time was varied (t = 2–20 min) by keeping the consolidation temperature constant. The consolidation degree of the sheets was studied on polished sections by light microscopy and quantified by density and peel test results. Specimens cut of the sheets were subjected to in‐plane static tensile and out‐of‐plane dynamic impact (instrumented falling weight impact, IFWI) tests. It was established that the best indicators for the consolidation degree are the density, tensile strength and specific perforation impact energy and between them linear correlations exists. Increasing the density of the composites resulted in increased tensile strength (due to lower void content and better fiber/matrix adhesion) and reduced perforation impact energy (due to hindered delamination between the constituent layers).
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Bárány et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: