Answers are grounded in this paper and cite their sources.
Experimental study reveals up to 53% lead-time reduction in structural frame welding using collaborative robotics, indicating improved manufacturing efficiency and worker safety.
Increasing the flexibility of automated systems to enable high-mix low-volume production is a major trend in concurrent manufacturing, aiming to overcome limitations such as lengthy setup times and skilled labor requirements. Robotic welding systems, although widely adopted, remain cost-effective primarily for large batches with low variability. To cope with this constraint, there is increasing interest in collaborative robotic applications, where human operators and robots cooperate to achieve partial automation while maintaining the flexibility of manual labor. In this work, a collaborative robotic welding system was developed for a specific industrial case study: structural frames for luxury retail fit-outs. These custom-designed frames act as support for furniture elements and decorative wall claddings in high-end retail shops. As such, they feature high dimensional variability and are currently produced by manual metal active gas (MAG) welding of rectangular hollow section (RHS) profiles. To address the automation challenge, a digital model of the cell was first developed to compare configurations and select a feasible production system. A two-station configuration, utilizing a 400 A MAG welding source mounted on a cobot coupled with an external linear axis, was engineered and tested in the actual production environment. Process quality was ensured by selecting low heat input parameters for the vertical-up welding of S275JR RHS profiles, which produced joints failing in the base metal at tensile strengths within the base-material range. The replacement of the manual butt joints with vertical fillet welds eliminated the post-processing grinding step and, together with the automation of welding, yielded a measured lead-time reduction of up to 53% in the two-station configuration and 36% in the single-station configuration. Beyond productivity, removing the operator from the arc and eliminating grinding markedly reduce exposure to welding fumes and to airborne metal particulates, improving operator safety while maintaining the desired product flexibility.
No takes yet. Share an insight, caveat, or question.
Bruni et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: