Answers are grounded in this paper and cite their sources.
Pseudobrookites (Fe2TiO5-FeTi2O5) are promising candidates for high-temperature oxide thermoelectrics. In this work, we used natural Fe-Ti-rich heavy mineral sand (HMS) as an abundant and environmentally friendly raw material for the preparation of pseudobrookite-based ceramics. The main components of the initial powder were ilmenite (FeTiO3) and pseudorutile (Fe2Ti3O9) with various degrees of alteration. Pre-oxidation of the as-received powder was used for modification of the Fe2+:Fe3+ ratio and exsolution of rutile. The starting powders were densified by conventional sintering (CS; 1200°C, 5 h, pressureless) and spark plasma sintering (SPS; 1100°C, 5 min, 150 MPs) in argon. The thermoelectric properties of the sintered compacts depend mainly on the Fe:Ti ratio, the Fe2+:Fe3+ ratio, and the fraction and distribution of rutile in the microstructures. The samples exhibit comparable properties as the pseudobrookite-based ceramics prepared from high-purity chemicals indicating that, with some further optimization, natural Fe-Ti-rich HMS are an interesting alternative for the preparation of pseudobrookite-based ceramics for thermoelectric applications.
No takes yet. Share an insight, caveat, or question.
Daneu et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: