Answers are grounded in this paper and cite their sources.
A vertical axis attritor was used to prepare several compositions of Sn 30 ( Co 1 − x Fe x ) 30 C 40 for 0 ⩽ x ⩽ 1 . The attrited materials were studied using X-ray diffraction (XRD), Mössbauer effect spectroscopy ( Fe 57 and Sn 119 ), and electrochemical methods. XRD and Mössbauer studies showed evidence of a nanostructured phase, most prominent near x = 0 , and nanocrystalline Fe Sn 2 , most prominent near x = 1 . The nanostructured phase is thought to be nanoscopic grains of amorphous Co 1 − x Fe x Sn in a carbon matrix. Fe 57 Mössbauer effect spectroscopy showed an increase in the amount of nanoscopic Fe 3 C as the Fe content increased, consistent with the formation of Fe Sn 2 in the same material due to the removal of Fe from Co 1 − x Fe x Sn when x is near 1. Electrochemical testing was performed for the x = 0 , 0.5, and 1 samples. Both the x = 0 and x = 0.5 samples showed excellent capacity retention with a specific capacity of 450 mAh ∕ g for at least 100 cycles . The irreversible capacity of these samples was about 85 mAh ∕ g . The x = 1 sample showed the highest reversible capacity of about 500 mAh ∕ g but its capacity retention was poor. Sn 30 ( Co 0.5 Fe 0.5 ) 30 C 40 may be a good compromise, allowing cost reduction by eliminating 50% of the Co while maintaining capacity retention.
No takes yet. Share an insight, caveat, or question.
Ferguson et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: