Answers are grounded in this paper and cite their sources.
The evolution of permeability in Al–4.5 wt%Cu during equiaxed dendritic solidification has been determined through physical and numerical modelling for solid fractions from 0.35 to 0.8. Cast samples solidified with a variety of cooling rates and quenched at different stages during dendritic solidification were used to generate 3D geometries of solidifying microstructure using x-ray microtomography. The permeability was then characterized (i) physically by passing glycerin through large-scale analogues of the microstructure and (ii) numerically by solving the continuity and momentum equations for the corresponding unstructured meshes of the 3D geometries used for the physical models. The numerically determined values of permeability are in good agreement with those measured and within the scatter of related studies. The permeability results have been compared with the Carman–Kozeny expression to determine the value of the Carman–Kozeny constant. Moreover, the correlation of secondary dendrite arm spacing and solid/liquid interfacial area per unit volume of solid with solidification time has been investigated for use as a practical means of characterizing the length scale for permeability determination.
No takes yet. Share an insight, caveat, or question.
Khajeh et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: