A photosensitive silicone-containing polyurethane acrylate prepolymer (Si-IPDI-HEA) was synthesized and characterized adequately by FTIR, 1 H NMR, and GPC analyses. The effect of the monomers on the photopolymerization kinetics of Si-IPDI-HEA was investigated by real-time infrared spectroscopy (RT-IR). The results showed that the resin of Si-IPDI-HEA with common acrylic monomers exhibited a high polymerization rate and double-bond conversion. The influence of the monomer and silicone on the microstructure and properties of the UV-cured film also was systematically studied. It was found that, with the increase of the functionality of the monomer, the thermostability, T g, hardness, tensile strength, tensile modulus, and dispersion surface energy of the UV-cured film were increased, whereas the contact angle and elongation at break were decreased. The introduction of silicone into the prepolymer could enhance the thermostability of the UV-cured film, and reduce the dispersion surface energy by the change of the microstructure. More importantly, the leather finishing agent containing Si-IPDI-HEA has excellent comprehensive performance and potential application in the leather finishing agent.
No takes yet. Share an insight, caveat, or question.
Yu et al. (2013) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: