Answers are grounded in this paper and cite their sources.
Aims: To study the effect of metal oxide nanoparticles (MgO, ZrO2, ZnO) on acrylic based soft liner surface properties and FTIR. Materials and Methods: Acrylic-based soft-liner specimens were prepared by adding three different concentrations (0.5, 1, and 2) %wt of metal oxide nanoparticles (MgO, ZrO2, ZnO). A disk-shaped specimens with 30mm diameter and 3mm thickness were prepared for shore (A) hardness test to evaluate the surface hardness of modified soft liner. The surface roughness of soft-liner samples (10X10X2mm) was tested by a profilometer. FTIR analysis was conducted to evaluate chemical reaction that may occur between acrylic-based soft liner and nanoparticles. Results: there were no chemical reaction carried out between soft liner and metal oxide nanoparticles at different concentration- surface hardness (shore A) was increased as nanoparticles concentration increased in modified resin. Nanoparticles with 1 and 2% concentration incorporated in soft liner had lower surface roughness value. Conclusions: Metal oxide nanoparticles have improved the surface texture of acrylic-based soft liner, while the hardness of modified soft liner was increased with nanoparticles concentration increases.
No takes yet. Share an insight, caveat, or question.
Sadoon et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: