Answers are grounded in this paper and cite their sources.
Vanadium/titanium mixed oxide films were produced using the sol-gel route. The structural investigation revealed that increased TiO 2 molar ratio in the mixed oxide disturbs the V 2 O 5 crystalline structure and makes it amorphous. This blocks the TiO 2 phase transformation, so TiO 2 stabilizes in the anatase phase. In addition the surface of the sample always presents larger amounts of TiO 2 than expected, revealing a concentration gradient along the growth direction. For increased TiO 2 molar ratios the roughness of the surface is reduced. Ion sensors were fabricated using the extended gate field effect transistor configuration. The obtained sensitivities varied in the range of 58 mV/pH down to 15 mV/pH according to the composition and morphology of the surface of the samples. Low TiO 2 amounts presented better sensing properties that might be related to the cracked and inhomogeneous surfaces. Rising the TiO 2 quantity in the films produces homogeneous surfaces but diminishes their sensitivities. Thus, the present paper reveals that the compositional and structural aspects change the surface morphology and electrical properties accounting for the final ion sensing properties of the V 2 O 5 /TiO 2 films.
No takes yet. Share an insight, caveat, or question.
Guidelli et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: