This is the authors' abstract. We don't add key points for this paper.
The rapid advancement of perovskite solar cells (PSCs) has revolutionized the field of photovoltaics due to their high-power conversion efficiency (PCE) and low-cost fabrication potential. However, the widespread use of lead-based perovskites such as MAPbI 3 raises environmental and stability concerns, motivating the search for lead-free alternatives with comparable performance. This study aims to perform a comprehensive comparative analysis of (MAPbI[Formula: see text] and (Cs 2 CuSbCl[Formula: see text] as active layers in device architectures to evaluate their photovoltaic performance with environmental compatibility. Using one-dimensional numerical simulations, the energy band alignment, internal electric field distribution, carrier generation–recombination rates and current density–voltage characteristics were systematically investigated for varying perovskite layer thicknesses (0.2–1.2[Formula: see text] [Formula: see text]m). The MAPbI 3 -based device exhibited a peak short-circuit current density ([Formula: see text] of 25.6[Formula: see text]mA/cm 2 , open-circuit voltage ([Formula: see text] of 1.10[Formula: see text]V, fill factor (FF) of 83.5% and PCE of 23.56% at 1[Formula: see text] [Formula: see text]m thickness. In contrast, the Cs 2 CuSbCl 6 -based device achieved [Formula: see text] [Formula: see text]mA/cm 2 , [Formula: see text] = 1.12[Formula: see text]V, FF [Formula: see text] 85.7% and a slightly higher PCE of 23.92% under the same conditions. The simulation further revealed that charge recombination at the perovskite/ETL interface decreases by [Formula: see text]18% in the Cs 2 CuSbCl 6 structure, improving its long-term operational stability. These findings highlight that Cs 2 CuSbCl 6 can serve as a promising lead-free alternative to MAPbI 3 , offering comparable efficiency with enhanced environmental sustainability. The study provides valuable design insights for developing next-generation, sustainable perovskite photovoltaic devices that balance efficiency, safety and durability.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ali et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: