Answers are grounded in this paper and cite their sources.
Threshing is a key part of agriculture that involves removing the seeds or grain from plants from the plant stalk. In most threshing operations the next steps are separation and cleaning seeds from material other than grains. The operation of separation refers to separating threshed grains from bulk plant material such as straw. Most of the topography of the western Oromia farm lands is not affordable for hiring combine harvesters. Nowadays, Different research centers including regional and federal have been manufacturing different models of stationary multi crop threshers. Even though, an effort made to develop and manufacture multi crop thresher is so encouraging most of can’t thresh efficiently more than two crop types. The performance of the multi crop thresher was tested at three different drum speeds of (DS1= 750, DS2 = 800 and DS3= 850 rpm and DS1= 480, DS2 = 530 and DS3= 580 rpm), three different feed rates of the crop (FR1 = 1250, FR2 = 2500 and FR3 = 3745 kg/hr. and FR1 = 915, FR2 = 1830 and FR3 = 2745 kg/hr) for wheat and maize crop respectively. Threshing capacity, threshing efficiency, cleaning efficiency and grain loss for wheat crop and shelling capacity, shelling efficiency, cleaning efficiency and mechanical damage for maize crop of the prototype machine were monitored at different drum speeds and feed rates. The maximum threshing capacity of 2066.01 kg/hr was observed at drum speed of 800 rpm and feeding rate of 3750 kg/hr. The maximum shelling capacity of 1817.4 kg/hr was observed at drum speed of 530 rpm and feeding rate of 2745 kg/hr followed by 1803.4 kg/hr at 480 rpm with the same feeding rate.
No takes yet. Share an insight, caveat, or question.
Workesa et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: