Answers are grounded in this paper and cite their sources.
In an effort to enhance lift on low-aspect-ratio rectangular flat-plate wings in low-Reynolds-number poststall flows, periodic injection of momentum is considered along the trailing edge in this numerical study. The purpose of actuation is not to reattach the flowbut to change the dynamics of thewake vortices such that the resulting lift force is increased. Periodic forcing is observed to be effective in increasing lift for various aspect ratios and angles of attack, achieving a similar lift enhancement attained by steady forcingwith lessmomentum input. Through the investigation on the influence of the actuation frequency, it is also found that there exists a frequency at which the flow locks on to a time-periodic high-lift state. Nomenclature AR = aspect ratio b = span CD = drag coefficient CL = lift coefficient C = steady momentum coefficient hCi = oscillatory momentum coefficient c = chord Fx, Fy = drag and lift forces F = nondimensional actuation frequency ( fL=U1) f = actuation frequency fact = actuator force f̂act = actuator force scaling vector fbdry = boundary force fn = natural shedding frequency L = characteristic length of separation p = pressure Q = Q criterion Re = Reynolds number ( U1c=) St = Strouhal number ( fnc sin=U1) s = material coordinate t = time U1 = freestream velocity u = velocity vector uact = actuator velocity x = streamwise, vertical, and spanwise coordinates, x; y; z x0; y0 = actuator position = angle of attack = Heaviside step function t = time step x = grid resolution ~ = regularized delta function = Lagrangian coordinate = kinematic viscosity = density = actuator slot width = phase! = vorticity vector
No takes yet. Share an insight, caveat, or question.
Taira et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: