Answers are grounded in this paper and cite their sources.
The interaction of ammonia with a single-crystal tungsten (100) surface has been investigated at pressures below 10−7 torr with a combination of techniques, including low-energy electron diffraction (LEED), flash desorption, mass spectrometry, and work-function measurements. The results indicate that adsorption of NH3 at room temperature is nondissociative, occurs with a sticking probability >0.45, and lowers the work function φ by ∼1 eV. Raising the temperature to ∼800°K after saturation results in dissociation of NH3 and desorption of H2, leaving behind half a monolayer of NH2 in a C(2 × 2) structure with a Δφ of ∼−0.4 eV. This structure can be destroyed rapidly at ∼1375°K, with desorption of H2 and N2. The NH2 density can be increased to ∼1 monolayer by exposure to ammonia at ∼800°K. During this process Δφ returns to a value of ∼0, the structure changes from a C(2 × 2) to a(1 × 1), and there is evidence that the rate of hydrogen desorption is controlled by the breaking of a N–H bond. Adsorption and desorption of NH3 occurs readily, but without decomposition, when all the NH2 sites have been filled. The (1 × 1)–NH2 layer desorbs as N2 and H2 in two stages, at ∼1150°K and ∼1375°K, each with the equivalent of half a monolayer of NH2. There are no indications that adsorbed NH or N are formed as intermediate products.
No takes yet. Share an insight, caveat, or question.
Estrup et al. (1968) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: