Answers are grounded in this paper and cite their sources.
This study examined the possibility of employing silica fume (SF) as a modifier to enhance the properties of natural bitumen (NB). SF was added to NB in three percentages: 30%, 40%, and 50% by weight of NB. Physical, chemical, and mechanical tests were performed to assess the impact of SF modifier on the performance of NB binder. The physical properties of modified NB samples improved, and their workability reduced compared to petroleum bitumen (PB). The preferable content of SF was 40%. However, there is a significant phase separation between NB binder and SF modifier. The SF modifier and NB interacted physico-chemically based on the chemical characterization analysis. Additionally, NB mixture was less flexible and more stable than PB mixture. This means modified NB had higher stiffness than PB. Also, SF imparts NB mixture higher splitting strength in dry condition more than PB. In contrast, it is less effective in wet condition since the splitting strength decreased by 37%. Therefore, the tensile strength ratio for NB mixture significantly dropped to less than permissible requirement, indicating less resistance to moisture damage. The abrasion loss ratios for NB mixtures were 31.5% and 75.7% for dry and wet conditions, respectively. These values exceeded the acceptable limits. Correspondingly, NB mixture was more susceptible to raveling distress than PB. In conclusion, the stability, stiffness, and splitting strength in dry condition were notably improved for mixture with NB modified with 40% SF. Nevertheless, it is still insufficient to improve the resistance against water damage and raveling distresses. Thus, it is recommended to use adhesion-enhancing modifiers to achieve balanced performance under moisture condition.
No takes yet. Share an insight, caveat, or question.
Latief et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: