Answers are grounded in this paper and cite their sources.
This paper presents the bursting strength of hydroentangled non-woven fabrics made from islands-in-the-sea fibers PET/COPET and pie segmented fibers (PA6/PET), and processed using inclined water jet apparatus. The effects of basis weights, water jets pressure and water jets inclination angle on bursting strength of hydroentangled nonwoven fabrics were discussed. The comparison was made on the bursting strength of hydroentangled fabrics of 60 g/m2 and 100 g/m2 processed by using perpendicular water jets at 00 and inclined water jets at 200 with pressure levels of 3bars and 7bars. The results showed that the increases of water jet pressure and basis weight caused an increase of the bursting strength of the hydroentangled fabrics. Furthermore, with increasing of water jets inclination angle, the bursting strength of 100 g/m2 hydroentangled non-woven fabrics were increased while the bursting strength of 60 g/m2 hydroentangled fabrics decreased. Finally the bursting strength of the pie segmented (PA6/PET) non-woven fabrics showed higher bursting strength compared with islands-in-the-sea (PET/COPET) non-woven fabrics. It can therefore be concluded that degree of inclination of the water jet played an important role in hydroentanglement process.
No takes yet. Share an insight, caveat, or question.
Ndaro et al. (2015) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: