Answers are grounded in this paper and cite their sources.
Metal components that undergo ultrasonic cleaning are often stored in rinse water before drying; during this dwell period, surface corrosion can nucleate and grow. Here, we investigate how two easily monitored water-quality parameters—chloride ion concentration (Cl−) and chemical oxygen demand (COD), a proxy for residual organic species—govern the initiation and propagation of corrosion on low-carbon steel. After ultrasonic cleaning in five representative cleaning solutions, test coupons were immersed for up to 72 h in the corresponding rinse water and the extent of corrosion was quantified by optical profilometry and mass loss. The surface area covered by corrosion scaled linearly with [Cl−] (0–150 mg L−1) and COD (5–120 mg L−1), with correlation coefficients of 0.92 and 0.88, respectively. When both parameters exceeded threshold values of 50 mg L−1 (Cl−) and 30 mg L−1 (COD), the corrosion rate doubled relative to the control. A two-step mitigation strategy—ion-exchange pretreatment followed by activated-carbon polishing—reduced Cl− and COD below the thresholds and suppressed corrosion formation by >70%. These findings provide a simple water-quality guideline and a low-cost process retrofit for manufacturers that store steel parts in high-humidity environments.
No takes yet. Share an insight, caveat, or question.
Tsuyoshi Yoda (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: