Answers are grounded in this paper and cite their sources.
This article reports experiments conducted to review several factors closely related to emission quality required for flat panel displays. Using the measurement of the emission of fabricated Spindt-type emitters, the dependence of current density on the distance from the tip of an emitter cone to the upper surface of the gate was investigated. It was also confirmed that the shape of the emitter cone was largely affected by the gate hole diameter and material of cone. The maximum half-angle of emission on anode from a tip was compared between the simulated electron beam spread and actual measurements made for emitter arrays.
No takes yet. Share an insight, caveat, or question.
Itoh et al. (1995) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: