Answers are grounded in this paper and cite their sources.
The spreading parameter S is the fundamental parameter controlling the stability of thin liquid films intercalated between a hydrophobic solid and a soft elastomer (Young modulus E ): S = γ SR − (γ SL + γ LR ), where γ SR, γ SL, and γ LR are respectively the solid/elastomer, solid/liquid, and liquid/elastomer interfacial tensions. We describe here a simple experimental method to determine S . We monitor by interferometry the profile of liquid droplets squeezed at the solid/elastomer interface. S is negative and the droplets do not spread. We find that (i) an intercalated droplet is a very flat semiellipsoid with a macroscopic contact angle of 90° and (ii) the radius R of the wet area scales like R ∝ H 2 / h 0, where H is the thickness at the center and h 0 = | S |/ E is a characteristic length in the range of 100 Å. From the shape analysis we extract h 0 and as a consequence the spreading parameter S . This measurement was performed for different liquids sandwiched between a cross-linked silicone polymer and chemically modified glass slides. Liquid droplets trapped at the solid/elastomer interface give similar results except that we get ellipsoid instead of semi-ellipsoid. In this particular case the spreading parameter is simply given by S = −2γ LR and compares well with an independent measurement of γ LR .
No takes yet. Share an insight, caveat, or question.
Martin et al. (1997) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: