Answers are grounded in this paper and cite their sources.
This study presents an experimental analysis of the performance of polycrystalline silicon photovoltaic modules installed in a desert environment of Agadez (Niger). The analysis is based on meteorological and electrical data collected during the year 2025. The main objective is to evaluate the influence of local climatic conditions, particularly dust accumulation, on the energy performance of the photovoltaic modules. The assessment of performance is based on several indicators, including energy output (ED), reference yield ( Y R ), array yield ( Y A ), module efficiency ( η ), and performance ratio ( PR ). Three experimental configurations were studied: uncleaned, weekly cleaned, and monthly cleaned module. The results indicate that the monthly average daily energy production varies between 4.25 and 8.85 kWh for the uncleaned module, 4.87 and 9.59 kWh for the weekly cleaned module, and 4.75 and 9.11 kWh for the monthly cleaned module. For a Y R between 6.41 and 9.03 h/day, the Y A , respectively, varies from 1.36 to 2.95 kWh/kWp for the uncleaned module, 1.57–3.19 kWh/kWp for the weekly cleaned module, and 1.53–3.03 kWh/kWp for the monthly cleaned module. Moreover, the maximum efficiency observed reaches 7.67% for the uncleaned module, 11.38% for the weekly cleaned module, and 8.22% for the monthly cleaned module. The analysis of the PR reveals energy losses between 7% and 15% for the uncleaned module compared with the cleaned modules. These results highlight the significant impact of dust accumulation on the performance of photovoltaic systems in desert environments. They also suggest that the polycrystalline technology has limited performance in the Sahelian conditions of Agadez, characterized by a high presence of dust and a relatively low Y A compared with the Y R .
No takes yet. Share an insight, caveat, or question.
Sani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: