Answers are grounded in this paper and cite their sources.
Melt processing is the most prominent method utilized in the fabrication of bulk YBa 2 Cu 3 O x (123) because of the superior transport and magnetic properties of this material. Due to the Y-diffusion-controlled growth mechanism of 123, the maximum allowable growth rate is sensitive to the size and distribution of the Y 2 BaCuO 5 precipitates. In addition, a slow cooling rate and a slow growth rate have to be employed to maintain the stability of the 123 planar growth front. Among the many melt-texturing methods and modifications, seeded directional solidification has the potential to produce long single-domained samples of large cross-sectional area with the strongly superconducting a-b planes aligned along the sample axis. Steady progress has also been achieved in flux-pinning enhancement through defect engineering. This includes the introduction and modification of defects such as twins, irradiation damage and second-phase inclusions. In particular, high-temperature mechanical deformation has been shown to be effective in increasing the dislocation density and results in improved J c as well as reduced J c anisotropy.
No takes yet. Share an insight, caveat, or question.
Saláma et al. (1994) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: