Answers are grounded in this paper and cite their sources.
Developing accelerated exposure tests that accurately predict the in-service performance of structural aircraft coatings remains challenging, largely due to the complexity of simulating real-world environmental conditions without altering key degradation mechanisms. This study evaluated four different coating systems under various accelerated exposure tests and compared their degradation behavior to in-service performance. Coating degradation was characterized using electrochemical impedance spectroscopy, scanning electron microscopy, and attenuated total reflectance Fourier transform infrared spectroscopy. Under in-service conditions, failure was primarily driven by the leaching of corrosion inhibitors, while the polymer matrix degraded predominantly through hydrolysis and thermo-oxidation. In contrast, during outdoor- or cyclic salt spray exposure, inhibitor leaching remained a key contributor to coating degradation although polymer degradation was mainly caused by ultraviolet radiation or hydrolysis. These findings emphasize the challenge of replicating real-world degradation in laboratory settings. Additionally, anodized oxide layers containing polymers within their pores played a critical role in maintaining protection during early coating failure. Chromate-based systems restored barrier properties, likely through chromate adsorption on hydrolyzed products within the oxide pores. In comparison, praseodymium-based systems failed to restore protection, while lithium-based systems sustained protection through an intact polymer.
No takes yet. Share an insight, caveat, or question.
Cornet et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: