Answers are grounded in this paper and cite their sources.
This study developed a high-capacity adsorbent for removing trace formaldehyde (HCHO) from hydrogen gas by a dual-modification strategy. Commercial activated carbon (AC) was first etched with ammonia to enhance its pore structure, and then functionalized with ethylenediamine to introduce amino groups. The ammonia-treated AC exhibited a specific surface area of 1212 m2/g and a pore volume of 0.54 cm3/g, representing increases of 69% and 72% over raw AC, respectively. Under optimal conditions (0.5 mol/L ethylenediamine, equal-volume impregnation), the adsorbent achieved a breakthrough time of 60 h and a maximum HCHO adsorption capacity of 61.9 mg/g in a fixed-bed test (with a H2 flow of 10,000 mL/h and an inlet HCHO concentration of 420 mg/m3). This performance was 63% higher than that of ammonia-treated AC alone. Characterization indicated that ammonia etching expanded the pore structure for improved physical adsorption, while ethylenediamine introduced N-H groups that enable chemical adsorption via Schiff base (C = N) formation with HCHO. The adsorbent realized complete HCHO removal (>99%) with good stability, providing a cost-effective solution for hydrogen purification in fuel cell applications.
No takes yet. Share an insight, caveat, or question.
Jiang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: