Answers are grounded in this paper and cite their sources.
A two-stage PPCI-diffusion combustion process recently showed good potential to enable clean and fuel-efficient gasoline compression ignition (GCI) combustion at medium-to-high loads. By conducting closed-cycle 3-D CFD combustion analysis, a further step was undertaken in this work to evaluate and optimize the PPCI-diffusion combustion strategy at a full load operating point (2000rpm-23.5 bar IMEPcc) while keeping engine-out NOx below 1 g/kWh. The light-duty GCI engine used in this investigation featured a custom-designed piston bowl geometry at a 17.0 compression ratio (CR), a high pressure diesel fuel injection system, and advanced single-stage turbocharging. A split fuel injection strategy was used to enable the two-stage PPCI-diffusion combustion process. First, the injector spray pattern and swirl ratio effects were evaluated. In-cylinder air utilization and the PPCI-diffusion combustion process were notably influenced by the closed-cycle combustion system design. Among the different spray patterns at a swirl ratio of 0, the one with 120° spray inclusion angle, 8-hole, and 1.5 times total nozzle area (TNA) was favored due to enhanced late-stage fuel-air mixing and more rapid diffusion combustion. In the second step, a fuel injection strategy optimization campaign was performed through a space-filling Design of Experiments (DoE) approach. Overall, the optimized injector spray pattern and the optimized fuel injection strategy together were predicted to produce 5.1% lower ISFC and 50% soot reduction over the baseline. A competitive analysis showed the optimized PPCI-diffusion combustion strategy had the potential to generate substantially lower NOx and soot than a modern light-duty diesel engine at full load.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: