Answers are grounded in this paper and cite their sources.
Tests of LaCoste-Romberg shipboard gravity meters in a gimbaled suspension in 1963 and on a stable platform in 1964 were made on a 100-foot vessel off the coast of California. Errors during the 1963 tests ranged up to 20 mgal under conditions in which the wave accelerations did not exceed 50 gal; during the 1964 tests very large errors were observed under conditions in which the wave accelerations at times exceeded 500 gals. In both tests the errors are shown to be caused primarily by nonlinear response of the gravity meter itself. Corrections can be computed from beam position records taken during the gravity observations at sea, provided that the meter nonlinearity has been determined in the laboratory. These corrections improved the accuracy of the measurements quite considerably, and the same method can be used to reduce errors in most previously obtained results with LaCoste-Romberg gravity meters. Long-period ship motions, which had been thought to be the principal source of error at one time, are shown to be unimportant. Apparent long-period accelerations recorded on low-pass filtered accelerometer records from the gimbaled meter are accounted for in terms of nonlinearities in the inertia-bar horizontal references. These apparent motions were not present on the corresponding accelerometer records from the gyroscopically stabilized platform, which employed more linear accelerometers of the force-rebalance type.
No takes yet. Share an insight, caveat, or question.
Harrison et al. (1968) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: