Answers are grounded in this paper and cite their sources.
Membrane contactors have been proposed as an advanced tool for CO 2 capture from flue gases by absorption in alkaline solutions. However, regeneration of the alkaline reagent and further CO 2 sequestration are pending issues. In this paper, membrane-assisted crystallization is proposed for crystallizing Na 2 CO 3, which allows its reuse, after CO 2 absorption from flue gases. Due to the presence of compounds other than CO 2 in flue gases (i.e., SO 2, NO x ), other compounds (Na 2 SO 4 and NaNO 3 ) may interfere with Na 2 CO 3 crystallization. This was evaluated by measuring the flux through the membrane and the morphology, crystallography, and purity of the crystals. Furthermore, the presence of NaCl possibly transferred from the osmotic solution to the feed solution was evaluated. The experimental results indicate that the presence of impurities decreases the flux through the membrane due to the decrease of water activity, although there is no influence on the overall mass transfer coefficient. The presence of Na 2 SO 4 affected the morphology of the Na 2 CO 3 crystals while NaNO 3 and NaCl had no apparent effect on the crystalline products. It was confirmed that Na 2 CO 3 ·10H 2 O was formed during the crystallization. Moreover, the purity of Na 2 CO 3 crystals reaches up to ca. 99.5%. Membrane-assisted crystallization was concluded to be feasible in recovering CO 2 as a carbonate salt, which can possibly be reused in the industry.
No takes yet. Share an insight, caveat, or question.
Ye et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: