Answers are grounded in this paper and cite their sources.
The extraction and characterization of defined and carboxyl-rich oligomeric lignin fragments with narrow molecular weight distribution is presented herein. With regard to the well-known pulp bleaching process, oxidative lignin depolymerization was investigated using hydrogen peroxide in an aqueous alkaline solution (i.e., at T = 318 K, t = 1 h) and subsequent selective fractionation with a 10/90 (v/v) acetone/water mixture. While the weight average molecular weight (MW) of lignin in comparison to the starting material was reduced by 82% after oxidation (T = 318 K, t = 1 h, clignin = 40 g L−1, cH2O2 = 80 g L−1, cNaOH = 2 mol L−1) and subsequent solvent fractionation (T = 298 K, t = 18 h, ccleavage product = 20 g L−1), the carboxyl group (–COOH) content increased from 1.29 mmol g−1 up to 2.66 mmol g−1. Finally, the successful scale-up of this whole process to 3 L scale led to gram amounts (14% yield) of oligomeric lignin fragments with a MW of 1607 g mol−1, a number average molecular weight (MN) of 646 g mol−1, a narrow polydispersity index of 3.0, and a high –COOH content of 2.96 mmol g−1. Application of these oligomeric lignin fragments in epoxy resins or as adsorbents is conceivable without further functionalization.
No takes yet. Share an insight, caveat, or question.
Junghans et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: