Key result
A low-cost, non-invasive heartbeat monitoring system using a Force Sensitive Resistor and RF module was designed and simulated to continuously monitor heart rate and alert caretakers of abnormalities.
This engineering study presents a conceptual design for a low-cost, temperature-insensitive wearable heart rate monitor using force-sensitive resistors.
Answers are grounded in this paper and cite their sources.
Should not change clinical monitoring; leaves open feasibility of low-cost FSR-based wearables pending validation.
Heart related problems are the major health issues for the human. Almost 1 in every 4 death is mainly due to the heart problems. Most of the people death due to heart problems is due to poor monitoring.To address this issue this project has been designed. The main aim of this project is to measure the heart rate of an elderly people and to alert the care taker when the heart rate is abnormal. The innovation done in this project is measuring the force of the heartbeat at the wrist and thereby measuring the heart rate. The component used to measure this heart rate is FSR (Force Sensitive Resistor).This device can be implemented by means of wrist watch or wrist band. It also monitors the heart rate of the people for 24 hours.
No takes yet. Share an insight, caveat, or question.
Pandiyan et al. (2014) studied Heart rate monitoring. Force Sensitive Resistor (FSR) based heartbeat monitoring system was evaluated. A low-cost, non-invasive heartbeat monitoring system using a Force Sensitive Resistor and RF module was designed and simulated to continuously monitor heart rate and alert caretakers of abnormalities.
Synapse has enriched 10 related papers. Consider them for comparative context: