This is the authors' abstract. We don't add key points for this paper.
High-performance, low-temperature processed thin-film transistors (TFTs) with ultrathin (30-nm) metal induced laterally crystallized (MILC) channel layers were fabricated and characterized. Compared with the MILC TFTs with thicker (100 nm) channel layers, the ones with the 30-nm channel layers exhibit lower threshold voltage, steeper subthreshold slope, and higher transconductance. Furthermore, the comparatively lower off-state leakage current and the higher on-state current of the "thin" devices also imply a higher on/off ratio. At a drain voltage of 5 V, an on/off ratio of about 3/spl times/10/sup 7/ was obtained for the 30-nm TFTs, which is about 100 times better than that of the 100-nm TFT's. No deliberate hydrogenation was performed on these devices.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Jin et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: