Answers are grounded in this paper and cite their sources.
A new technique for the preparation of site specific plan-view specimens using a focused ion beam system is presented. The technique consists of milling a wedge shaped piece of material which is free from the substrate, lifting this out using a micromanipulator and needle, and orientating it on the substrate with the original surface vertical. The plan-view specimen is then milled from this piece of material using an approach based on the “lift-out” technique for the preparation of a cross-section specimen. Advantages of this technique over current methods based on the “lift-out” and the “trench” techniques are that the plan-view specimens are site specific, the surrounding substrate is left intact, and numerous plan-view specimens can be prepared in close proximity to one another.
No takes yet. Share an insight, caveat, or question.
Langford et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: