Answers are grounded in this paper and cite their sources.
This study addresses the microwave-assisted liquefaction of olive pomace (OP) using m-cresol, a more reactive solvent than phenol, to produce resin precursors at atmospheric pressure for the first time. The study systematically investigated the effects of critical process parameters, such as microwave power, reaction time, and catalyst ratio, on the liquefaction yield and the amount of combined solvent. The findings were compared with those obtained using traditional phenol and oil bath heating methods, demonstrating the effectiveness of the proposed system for biomass conversion. The results indicated that the microwave-assisted method outperformed the traditional oil bath system in liquefying olive pomace, achieving a higher yield in a shorter reaction time. The maximum liquefaction yield (95.63%) was achieved using 550 W power, a 3:1 solvent-to-OP ratio, and a 3% H2SO4 catalyst ratio at 75 min. A reduction in the liquefaction yield was observed at 450 W power when the acid content exceeded 3%; this was attributed to increased re-condensation reactions among the radical fragments of the degraded biomass. In tests of the reaction kinetics conducted at various times and power levels, it was determined that the liquefaction of OP waste in the presence of m-cresol adhered to the second-order kinetic model.
No takes yet. Share an insight, caveat, or question.
Salan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: