Study of sulfur heterogeneous nucleation from supersaturated vapor on tungsten oxide and sodium chloride seed particles. Determination of contact angle of critical sulfur nuclei

A procedure has been developed for determining the contact angle of a critical nucleus formed on seed particles during the heterogeneous nucleation of a vapor in a flow chamber. The procedure comprises the determination of the fraction of enlarged particles, as well as the selective separation of nanoparticles over sizes to locate the zone of intense nucleation. The concentration and size distribution of aerosol particles have been measured with a diffusion spectrometer of aerosols. Vapor concentration distributions and supersaturation fields have been determined by solving the mass-transfer problem. The calculated supersaturation fields are in good agreement with the location of the intense nucleation zone experimentally found with the help of selective separation. The fractions of enlarged particles have been determined as functions of supersaturation in the chamber. A formula has been derived for calculating the fraction and size distribution function of enlarged particles at known supersaturation and temperature fields and a preset contact angle. The contact angles are selected in a manner such that the calculated fraction of enlarged particles coincides with that measured experimentally. It has been revealed that the contact angle of critical sulfur nuclei formed on tungsten oxide seed particles with average radii 〈R p〉 ≈ 5.8−4.4 nm is in a range of 21.2−20.5°, while, in the case of sodium chloride seed particles with 〈R p〉 ≈ 6.0−4.4 nm, the contact angle is 20.4−17.4°. The size of a critical nucleus has been found to be proportional to calculated average radius of a seed particle 〈R p〉 in both cases.