Answers are grounded in this paper and cite their sources.
The integration of hydrophobic cellulose nanocrystals (CNCs) into polyhydroxybutyrate (PHB) films presents challenges due to poor compatibility and dispersion. This study introduces a sustainable PHB-based nanocomposite film reinforced with hydrophobic CNC palmitate (CNCP), demonstrating how biomacromolecular surface modification enhances dispersion, mechanical performance, and moisture resistance in biodegradable polymers. CNCs were esterified with palmitoyl chloride to produce CNCP with varying degrees of substitution (DS) and incorporated into PHB films. Fourier-transform infrared spectroscopy (FTIR) confirmed successful esterification, while X-ray diffraction (XRD) analysis indicated enhanced dispersion within the PHB matrix. Water contact angle measurements demonstrated an increase in hydrophobicity, with a 6 wt% CNC palmitate in PHB composite film improved water resistance and reduced water absorption. Mechanical testing revealed that while the addition of CNCP3 (DS = 0.6) did not significantly increase tensile strength compared to pure PHB film, CNCP5 (DS = 0.9) demonstrated a notable reinforcement effect, with a PHB composite film containing 6 wt% CNCP5 achieving a tensile strength of 9.7 ± 0.6 MPa, representing a 43 % increase over pure PHB film, without compromising elongation at break. Thermal analysis showed improved stability, with a higher degradation temperature and residual mass. UV-Vis spectroscopy indicated enhanced UV barrier properties while maintaining film transparency. This study highlights the successful incorporation of hydrophobically modified CNC palmitate into PHB film. The results demonstrate simultaneous enhancement of hydrophobicity, mechanical performance, and thermal stability, without compromising film transparency. The use of CNC palmitate as a nanofiller in PHB composites remains largely underexplored in current literature. These findings suggest its potential for application in biodegradable packaging and other sustainable materials. • CNC palmitate enhances hydrophobicity and water resistance of PHB. • PHB film with 6 wt% CNCP (DS 0.9) shows 43 % higher tensile strength with flexibility. • PHB/CNC palmitate films show improved UV-shielding while retaining transparency. • CNC palmitate is a promising nanofiller for biodegradable and sustainable packaging.
No takes yet. Share an insight, caveat, or question.
Lim et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: