Answers are grounded in this paper and cite their sources.
The fabrication of prototype composite membranes consisting of permeable, size-selective hydrogel thin films on porous alumina membrane supports is described. Smooth hydrogel films with sub-100 nm thicknesses lacking micrometer-sized pinholes were readily synthesized using initiated chemical vapor deposition (iCVD). iCVD was a convenient technique for membrane applications as it enabled control over the coating conformality by modulating surface concentrations of the polymer precursors and film thickness through in situ monitoring of the deposition process. Scanning electron microscopy confirmed that the deposited film bridged the pore openings of the alumina supports, and little pore infiltration occurred. Membrane permeability was controlled through variation of the thickness and composition of the iCVD poly[maleic anhydride-co-dimethylacrylamide-co-di(ethylene glycol) di(vinyl ether)] (PMaDD) film. The combination of swelling and stability was achieved for a film composition of 76% N,N-dimethyl acrylamide, 14% maleic anhydride, and 10% di(ethylene glycol) divinyl ether. Swelling was shown to be pH-responsive, with a maximum swelling ratio of 11.5 at pH 8, which is a significant improvement over previous iCVD-deposited hydrogels. Hydrogel nanofilms reached their swelling equilibrium in a few minutes. Diffusion and selectivity of permeants in the membrane were also modeled and characterized. The hydrogel's internal pore size was calculated to be 3.2 nm at pH 7, which readily allowed the passage of glucose while excluding bovine serum albumin (BSA). Techniques to graft films to the substrates have been developed. By reacting 3-aminopropyldimethylethoxysilane with silanol groups of silicon surfaces and the alumina hydroxide of alumina surfaces, covalent bonds between the substrates and anhydride functionalities in the hydrogels were formed, which was necessary for stable adhesion. Further utility of PMaDD was demonstrated by functionalizing it with 2-aminoethanethiol and poly(ethylene glycol) to modulate its interaction with proteins in solution. A simple technique to pattern the film was demonstrated, and PMaDD was functionalized with CdSe/ZnS core−shell quantum dots to reveal the hydrogel properties of the patterns.
No takes yet. Share an insight, caveat, or question.
Tenhaeff et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: