Answers are grounded in this paper and cite their sources.
The PC1D simulation aand origin software were successfully used for the study of Carrier Lifetime and Temperature effect on InGaN Single-Junction Solar Cell. For the simulation, the total device area was 100 cm2, dielectric constant 13.1, band gap 1.35eV, intrinsic constant is 1×1010 cm-3, doping concentration is 1×1017 cm-3, electron number and hole number 1000 and 170 respectively, and the refractive index was 3.58. The optimized temperature and bulk recombination were 25°C and 1000μs respectively along with the efficiency of 18.258 % for both n and p - InGaN solar cell. Several graphs were plotted under the following conditions: a) bulk recombination time of p-InGaN and temperature are kept constant at 1000 μs and 25°C, the variation of bulk recombination time of n - type InGaN solar cell with base current and voltage, maximum current and voltage, and efficiency and maximum power were studied. b) bulk recombination time of n-InGaN and temperature are kept constant at 1000 μs and 25°C, the variation of bulk recombination time of p - type InGaN solar cell with base current and voltage, maximum current and voltage, and efficiency and maximum power were studied.
No takes yet. Share an insight, caveat, or question.
Parajuli et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: