Answers are grounded in this paper and cite their sources.
Porous iron-based materials are attractive for structural, acoustic, and thermal management applications due to their low cost, availability, and tunable performance. This study introduces a simple and cost-effective route for fabricating multiporous iron structures by combining in-situ reduction and sintering of hematite (Fe 2 O 3 ) powders with graphite as space holder. The approach integrates submicrometric iron oxide powders with granulated space-holder, yielding a dual-scale architecture of nanopores within the struts and micrometric pores replicating graphite morphology. Complete removal of the space holder was achieved at ≥800 °C with relatively fast heating rates (5 °C/min). Subsequent hydrogen treatment promoted complete reduction of hematite to metallic iron across the 850–1050 °C range, as confirmed by XRD and mass loss analyses. Based on thermogravimetric analysis data, kinetic parameters were determined and Avrami-Erofeev equation was found most suitable for describing each reduction step. Microstructural characterization revealed that densification of the struts is strongly dependent on sintering temperature and the phase-specific diffusion coefficients of iron. A non-monotonic mechanical response was observed across the temperature range, explained by the interplay between reduction kinetics, pore evolution, and phase-dependent diffusion. These findings demonstrate that porous iron structures can be tailored through space-holder engineering and submicrometric oxide powders combined with in-situ reduction–sintering. The methodology provides a scalable pathway for producing iron-based multiporous materials with controlled porosity and optimal mechanical strength.
No takes yet. Share an insight, caveat, or question.
Deschamps et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: