This is the authors' abstract. We don't add key points for this paper.
In this paper, we designed and developed biomedical β -type Ti–Nb quaternary alloy materials with high strength and low modulus. Building upon the d -electron alloy design method and the valence electron concentration e/a method, we use a Python program and thermodynamic theoretical parameters to determine a Ti–Nb quaternary alloy with the characteristics of a single-phase solid solution. Subsequently, we engage in theoretical and experimental investigations on the low modulus alloys identified through first-principles calculations. The results show that both Ti 7 Nb 6 Zr 1 Al 2 and Ti 11 Nb 2 Ta 2 Al 1 maintain a single β phase before and after cold rolling, which is related to the strong electronic density of states of s and p orbitals at low energy levels in the crystal structure of the two alloys. Ti 11 Nb 2 Ta 2 Al 1 has a strong charge distribution on the (001) crystal plane, which causes a large amount of internal stress under large deformation conditions to promote grain crushing and weaken the intensity of the (001)[1-10] texture in the ODF diagram of φ φ 2 = 45°. The cold-rolled Ti 11 Nb 2 Ta 2 Al 1 exhibits better corrosion resistance and biocompatibility than the cold-rolled Ti 7 Nb 6 Zr 1 Al 2 , and the good biocompatibility is related to the strong covalent bond between Al and Ta that inhibits the diffusion of Al ions. 90% cold-rolled Ti 11 Nb 2 Ta 2 Al 1 stands out as an exceptionally promising orthopedic implant material due to its high elastic allowable strain ( R eH /E), good corrosion resistance and biocompatibility.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: