This is the authors' abstract. We don't add key points for this paper.
Ceramic slurries with different contents of Al 2 O 3 were formulated and alumina ceramic parts with promising surface morphology were fabricated by using digital light processing photopolymerization‐based additive manufacturing technology. The factors influencing curing depth of the slurries were studied, while the effects of powder content on shrinkage of the green bodies and microstructure, density, and hardness of the sintered bodies were evaluated. Although the curing depth was decreased with increasing content of Al 2 O 3 , all the five groups of slurries could be well cured, as the exposure time was set to be 16 s. According to TG‐DTG curves, the weight loss of the samples was completed at about 580°C. Samples from the slurries with 70 and 75 wt.% Al 2 O 3 had dense microstructure, without obvious cracks at both the macro‐ and micro‐scales. Furthermore, with increasing content of Al 2 O 3 in slurries, the bulk density and hardness of sintered bodies were increased. It is believed that our results could be used as a reference for the fabrication of alumina ceramics through additive manufacturing technology.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: