Answers are grounded in this paper and cite their sources.
Effective separation methods must be developed before bio-oils become a source of chemical products or liquid fuels by further upgrading. Phase separation is one effective pathway to realize an initial isolation of bio-oils. When aqueous salt solutions are added, phase separation of the pyrolysis bio-oil can occur to form two different phases: the upper layer with high contents of water, acetic acid, and water-soluble compounds and the bottom layers with low water content and high lignin pyrolysis compounds [ Song, Q.-H.; Nie, J.-Q.; Ren, M.-G.; Guo, Q.-X. Effective phase separation of biomass pyrolysis oils by adding aqueous salt solutions. Energy Fuels 2009, 23 (6), 3307−3312]. In this paper, the salt-induced phase separation of bio-oils with 20 kinds of salt solutions was investigated. On the basis of the dependence of the mass ratio of the bio-oil bottom layer to the whole bio-oil sample upon the salt solution concentrations, it has been demonstrated that the phase separation derives from a normal ionic strength effect as well as chemical properties for some metal ions. Solvent fractionations of the two-phase bio-oils were performed, and fractions were characterized by elemental and gas chromatography/mass spectrometry (GC/MS) analyses. Among the four bottom-layer bio-oil fractions, fraction A contains insoluble macromolecular substances, such as cellulose, and fractions, B, C, and D are mainly phenolic compounds. Furthermore, O-methylation of the mixtures of fractions B, C, and D with dimethyl carbonate (DMC) has been performed in ionic liquid [Bmin]Cl, and the reaction is highly effective and recyclable for the ionic liquid. The modified mixture of the fractions reveals a large elevation in the heating value.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: