Answers are grounded in this paper and cite their sources.
Reaction forces from nutrunner tools constitute a risk of developing MSDs. However, recommendations for sustainable reaction force levels are lacking. The aim of this study was to inform recommendations regarding reaction load exposures from right-angle nutrunners. Through a psychophysics approach, experienced assembly workers subjectively assessed reaction loads when using a nutrunner in six combinations of tool tightening strategy, work-pace and screw-joint stiffness. Electromyography, tool and joint parameters were measured. Regardless of tightening strategy, joint stiffness and work-pace combinations, no large differences in acceptable tightening torque, peak reaction force, and handle displacement were observed. However, acceptable jerk and impulse differed substantially between the TurboTight® (high-acceleration) and QuickStep® (conventional) tightening strategies. Although the TurboTight® strategy overall showed reduced peak muscular activities compared to the QuickStep®, the participant-rated acceptable torque levels were similar, plausibly due to TurboTights' high jerk levels. Jerk and impulse are hypothesized to influence the perception of reaction loads.
No takes yet. Share an insight, caveat, or question.
Mazaheri et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: