Answers are grounded in this paper and cite their sources.
Tantalum oxide ~hin film capacitors of approximately 10* ~f were prepared by anodization of sputtered tantalum films and vacuum evaporation of gold counterelectrodes. Initial leakage currents at 75 v d.c. were obtained and the capacitors were placed on a constant voltage life test. The variables studied were anodization voltage (100v-300v), life test voltage (lOv-65v) and life test temperature (RT-110°C). The proportion of test samples meeting a 0.01 ~A leakage current measurement at 75 volts varied from about 90% for films formed at 130 volts to about 100% for films formed at > 165 volts. Marked improvement In life test performance with increasing anodization voltage was observed. For films produced at 165-300 volts no failures were observed in ~ 400 samples for 2500 hours at 50 volts and 85°C. The behavior of leakage current, reverse and forward breakdown voltages, capacitance and dielectric loss as a function of anodization voltage was examined. The data obtained from the former two measurements demonstrate a maximum in these properties in the region of 200 volts and indicate that higher anodization voltages do not lead to any significant improvement in capacitor properties.
No takes yet. Share an insight, caveat, or question.
Vromen et al. (1965) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: