Answers are grounded in this paper and cite their sources.
Design of cast blasting rounds and optimization of the blasting process has taken on a new and much greater importance with the emergence of overburden casting operations involving thousands of tons of explosives in each blast. This paper addresses the fundamentals of blast design and optimization for explosive fragmentation and casting. It indicates that one key variable—the strain energy set up in the rock mass by the blast vibration—can be used to predict the extent of damage done to the remaining rock mass, the degree of fragmentation of the rock broken loose, and the velocity of the broken rock. It also shows how the dynamic strength of the rock mass, the fracture energy of its joints, and the geometry of the blast influence the fragment size distribution and the velocity of the broken rock. The dynamic tensile strength of the rock mass and its joints and weak planes may be measured in a new type of impact experiments. Preliminary results of such strength measurements in one type of sandstone material are presented. The same type of experiment was also be used to estimate the fracture energy, i.e. the energy consumed in creating a unit of fracture surface by dynamic tensile fracture. In rock blasting, the strain energy distribution within the entire rock mass, including the rock being broken loose, can be predicted on the basis of a few accelerometer measurements, which provide calibration of the complicated interaction between the specific rock material and explosive used at a specific location. A statistical approach is proposed for determining the local fragment size distributions and fragment throw trajectories from the strain energy field. The techniques outlined in this paper could form a framework for a statistical calculation—based on measured data—and an optimization of the entire rock blasting process with respect to rock damage, fragmentation and throw velocity.
No takes yet. Share an insight, caveat, or question.
Per‐Anders Persson (1997) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: