Answers are grounded in this paper and cite their sources.
A combined in-mold decoration and microcellular injection molding (IMD/MIM) method has been used in this paper. The foamed PP/nano-CaCO3 composites were prepared to investigate their mechanical properties, cellular structure, and surface quality. The content of nano-CaCO3 varied from 0 to 10 wt %. The results showed that nano-CaCO3 acted as a reinforcing phase and nucleating agent, which help to improve the mechanical properties of foamed composites. The cellular structure and mechanical properties were optimum when the nano-CaCO3 content was 6 wt %. In the vertical section, the cell size and density of transition layer on the film side was bigger than that on the non-film side. In the parallel section, the cell ratio of length to diameter of transition layer on the film side was smaller than that on the non-film side, and the cell tile angle was larger than that on the non-film side. With nano-CaCO3 content increasing, the surface quality showed a trend of decreasing first and then increasing.
No takes yet. Share an insight, caveat, or question.
Yan et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: